Grizzly G0470 instruction manual Draining Tank, Pressure Safety Valve, To drain the tank

Page 18

Monthly

After the first 50 working hours or 30 days, perform the following maintenance:

1.Change the oil in the air compressor pump as described in Changing Oil on

Page 19.

Quarterly

After every 300 working hours or 3 months, perform the following maintenance:

1.Change the oil in the air compressor pump as described in Changing Oil on

Page 19.

2.Check for air leaks and correct as needed.

Draining Tank

Some water may accumulate in the tank depending on usage and humidity. Drain water from the tank daily to increase the lifespan of the compressor and air tools.

To drain the tank:

1.Leave the tank pressurized and open the drain valve, shown in Figure 10, to drain the water out of the tank.

Note: Draining the air from the tank will be extremely loud. Wear ear protection when draining the tank.

Figure 10. Tank drain valve.

Pressure Safety

Valve

The pressure safety valve prevents dam- age to the tank by releasing pressure when the tank reaches maximum capacity.

To check the pressure safety valve:

1.Locate the pressure safety valve shown in Figure 11.

Pressure

Safety Valve

Figure 11. Pressure safety valve.

Releasing the safety valve can be extremely loud. Protect your hearing with ANSI approved ear protection.

2.Clean any dirt or dust from the pres- sure safety valve.

3.Pull the metal ring on top of the safety valve to ensure the valve will release air. The pressure safety valve must be replaced if it cannot be pulled, or if it leaks after releasing pressure.

Note: The safety valve is preset to release air if the tank exceeds its maxi- mum pressure. DO NOT try to adjust the safety valve pressure setting!

-16-

Model G0464/G0465/G0467/G0468/G0470 (Mfg. since 9/04)

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Air Compressor Page Table of Contents Introduction Foreword Contact InfoMachine Data Sheet Safety Mation about proper operation of the equipmentMake Workshop Child Proof Additional Safety Instructions For Air Compressors AIR Compressor StorageCircuit Requirements 110V OperationGrounding Unpacking SET UPAssembly To assemble the air compressorPlacement Operation Safety Starting OperationsTo start the air compressor Line Pressure Regulation To control the air supply to your toolConnecting Tools To connect air tools to your air com- pressorWhen storing your air compressor, fol- low these guidelines StorageMaintenance ScheduleDraining Tank Pressure Safety ValveTo check the pressure safety valve To drain the tankService TroubleshootingSymptom Possible Cause Possible Solution See Changing Oil Check ValveFixing Air Leaks To find air leaksPressure Switch Pressure adjustment screwsG0464 Parts Breakdown G0464 Parts List DescriptionG0465 Parts Breakdown G0465 Parts List G0467 Parts Breakdown G0467 Parts List DescriptionG0468 Parts Breakdown G0468 Parts List G0470 Parts Breakdown G0470 Parts List Warranty and Returns Warranty Card Place Stamp Here Name Street CityStateZip

G0470 specifications

The Grizzly G0470 is a powerful and versatile bandsaw that specializes in wood cutting and shaping, making it an essential tool for woodworkers and carpenters. This robust machine is designed for both hobbyists and professionals, offering an impressive blend of features, technologies, and characteristics that ensure optimal performance and durability.

One of the standout features of the Grizzly G0470 is its heavy-duty construction. The saw is built with a solid cast iron frame that provides stability and minimizes vibration during operation. This construction not only enhances the accuracy of cuts but also extends the lifespan of the machine. The saw's large table, measuring 20 inches by 27 inches, offers ample space for handling large workpieces, making it ideal for resawing thick lumber or creating intricate designs.

The Grizzly G0470 is powered by a robust 2 HP motor that delivers consistent performance and can handle a wide range of cutting tasks. The motor is also designed for durability and quiet operation, which is crucial for maintaining a comfortable working environment. With a variable speed drive, users can adjust the cutting speed according to the material being processed, ensuring smooth cuts whether working with hardwoods or softer materials.

Technologically, the G0470 is equipped with a precision-crafted blade that allows for clean and accurate cuts. The bandsaw accepts blades ranging from 1/4 inch to 3/4 inch in width, providing flexibility for different types of cutting applications. Additionally, the blade tensioning system is user-friendly, enabling quick adjustments to achieve the optimal tension for various cutting needs.

Another noteworthy characteristic of the Grizzly G0470 is its dust collection capability. The saw is designed with a dust port that can be connected to a dust collection system, helping to maintain a clean workspace while minimizing airborne particles. This feature not only promotes a healthier work environment but also extends the life of the machine by reducing sawdust accumulation.

Overall, the Grizzly G0470 is an exceptional bandsaw that combines heavy-duty construction, a powerful motor, variable speed options, and effective dust collection features. It is designed to meet the demands of both serious hobbyists and professional woodworkers, making it a valuable addition to any workshop. Its reliable performance and versatility make it an ideal choice for anyone looking to enhance their woodworking capabilities.
Top Page Image Contents