Grizzly G0470 instruction manual Safety, Mation about proper operation of the equipment

Page 6

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

not avoided, COULD result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

not avoided, MAY result in minor or moderate injury.

 

 

It may also be used to alert against unsafe practices.

NOTICE

This symbol is used to alert the user to useful infor-

mation about proper operation of the equipment.

Safety Instructions for Pneumatic Tools

1.READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED

SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

3.ALWAYS WEAR AN ANSI APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Wood dust is a carcinogen and can cause cancer and severe respiratory illnesses.

4. ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to contain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery.

-4-

Model G0464/G0465/G0467/G0468/G0470 (Mfg. since 9/04)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Air Compressor Page Table of Contents Introduction Foreword Contact InfoMachine Data Sheet Safety Mation about proper operation of the equipmentMake Workshop Child Proof Additional Safety Instructions For Air Compressors AIR Compressor StorageCircuit Requirements 110V OperationGrounding Unpacking SET UPAssembly To assemble the air compressorPlacement Operation Safety Starting OperationsTo start the air compressor Line Pressure Regulation To control the air supply to your toolConnecting Tools To connect air tools to your air com- pressorWhen storing your air compressor, fol- low these guidelines StorageMaintenance ScheduleDraining Tank Pressure Safety ValveTo check the pressure safety valve To drain the tankService TroubleshootingSymptom Possible Cause Possible Solution See Changing Oil Check ValveFixing Air Leaks To find air leaksPressure Switch Pressure adjustment screwsG0464 Parts Breakdown G0464 Parts List DescriptionG0465 Parts Breakdown G0465 Parts List G0467 Parts Breakdown G0467 Parts List DescriptionG0468 Parts Breakdown G0468 Parts List G0470 Parts Breakdown G0470 Parts List Warranty and Returns Warranty Card Place Stamp Here Name Street CityStateZip

G0470 specifications

The Grizzly G0470 is a powerful and versatile bandsaw that specializes in wood cutting and shaping, making it an essential tool for woodworkers and carpenters. This robust machine is designed for both hobbyists and professionals, offering an impressive blend of features, technologies, and characteristics that ensure optimal performance and durability.

One of the standout features of the Grizzly G0470 is its heavy-duty construction. The saw is built with a solid cast iron frame that provides stability and minimizes vibration during operation. This construction not only enhances the accuracy of cuts but also extends the lifespan of the machine. The saw's large table, measuring 20 inches by 27 inches, offers ample space for handling large workpieces, making it ideal for resawing thick lumber or creating intricate designs.

The Grizzly G0470 is powered by a robust 2 HP motor that delivers consistent performance and can handle a wide range of cutting tasks. The motor is also designed for durability and quiet operation, which is crucial for maintaining a comfortable working environment. With a variable speed drive, users can adjust the cutting speed according to the material being processed, ensuring smooth cuts whether working with hardwoods or softer materials.

Technologically, the G0470 is equipped with a precision-crafted blade that allows for clean and accurate cuts. The bandsaw accepts blades ranging from 1/4 inch to 3/4 inch in width, providing flexibility for different types of cutting applications. Additionally, the blade tensioning system is user-friendly, enabling quick adjustments to achieve the optimal tension for various cutting needs.

Another noteworthy characteristic of the Grizzly G0470 is its dust collection capability. The saw is designed with a dust port that can be connected to a dust collection system, helping to maintain a clean workspace while minimizing airborne particles. This feature not only promotes a healthier work environment but also extends the life of the machine by reducing sawdust accumulation.

Overall, the Grizzly G0470 is an exceptional bandsaw that combines heavy-duty construction, a powerful motor, variable speed options, and effective dust collection features. It is designed to meet the demands of both serious hobbyists and professional woodworkers, making it a valuable addition to any workshop. Its reliable performance and versatility make it an ideal choice for anyone looking to enhance their woodworking capabilities.
Top Page Image Contents