Parkside PDS 290 AI manual General safety advice for electrical power tools, Personal safety

Page 8

General safety advice for electrical power tools

e)When working outdoors with an electrical power tool always use ex- tension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.

f)Use a residual current device (RCD) for protection if operating the electri- cal power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock.

3. Personal safety

a)Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of

drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury.

b)Wear personal protective equipment and always wear

safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of elec- trical power tool used and work undertaken, reduces the risk of injury.

c)Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on.

d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.

e)Avoid placing your body in an unnat- ural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances.

f)Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov- ing parts. Loose clothing, jewellery or long hair can become trapped in moving parts.

g)If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust.

4.Careful handling and use of electrical power tools

a)Do not overload the device. Always use an electrical power tool that is intended for the task you are under- taking. By using the right electrical power tool for the job you will work more safely and achieve a better result.

b)Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.

c)Pull the mains plug from the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device.

d)When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dan- gerous when they are used by inexperienced people.

e)Look after the device carefully. Check that moving parts are working prop- erly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have dam- aged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools.

f)Use the electrical power tool, accesso- ries, inserted tools etc. in accordance

8

GB/IE

Image 8
Contents Delta Sander PDS 290 A1 GB / IE Page Page Table of contents Features and equipment IntroductionIncluded items Proper useWorkplace safety Electrical safetySound power level Noise and vibration dataCareful handling and use of electrical power tools General safety advice for electrical power toolsPersonal safety Preparing for use Safety advice relating spe- cifically to delta sandersHave you understood everything? Preparing for use Vacuum dust extractionAdapter for external vacuum extraction with reducer piece Attaching / detaching sanding sheetsAdvice on use WarrantyMaintenance and cleaning Service centreDisposal / Declaration of Conformity / Manufacturer DisposalInhaltsverzeichnis EinleitungAllgemeine Sicherheitshinweise für Elektrowerkzeuge InbetriebnahmeEinleitung AusstattungLieferumfang Bestimmungsgemäßer GebrauchArbeitsplatz-Sicherheit Elektrische SicherheitSchleifplatte SchalldruckpegelAllgemeine Sicherheitshinweise für Elektrowerkzeuge Sicherheit von PersonenVerwendung und Behandlung des Elektrowerkzeugs Zweckentfremden Sie das Kabel nicht, um das ElektroGerätespezifische Sicherheitshinweise für Dreieckschleifer WARNUNG! Giftige DämpfeAlles verstanden? StaubabsaugungAdapter zur Fremdabsaugung mit Reduzierstück Schleifblatt anbringen / abziehenSchleifplatte Schritten drehen ArbeitshinweiseGarantie / Entsorgung EntsorgungMobilfunk max ,42 € / Min Werfen Sie Elektrowerkzeuge nicht in den HausmüllKonformitätserklärung / Hersteller Konformitätserklärung HerstellerKompernass Gmbh