User-Maintenance
Instructions
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation: Always disconnect Nailer from its compressed air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use.
To prevent explosion: Lubricate tool only with specified lubricants. Lubricate the air inlet using only pneumatic tool oil. Lubricate internal mechanism using only white lithium grease. Other lubricants may damage the mechanism and may be highly flammable, causing an explosion.
1.Disconnect the Framing Nailer from its air supply.
2.Empty Magazine (71) completely.
3.Try to fire the Nailer into a piece of scrap wood or flooring to ensure that it is disconnected and inca- pable of firing any nails.
4.Always leave Magazine open dur- ing maintenance. The Magazine is
5.BEFORE EACH USE, inspect gener- al condition of Framing Nailer. Check for loose screws, misalignment or binding of moving parts, jammed nails, cracked or broken parts, dam- aged air supply hose, and any other condition that may affect the safe operation of this tool. If abnormal noise or vibration occurs, immediately disconnect the Nailer from its com- pressed air supply source and have the problem corrected before further use. Do not use damaged equipment.
6.PERIODICALLY, use a premium quality, lightweight oil to lubricate all moving parts.
7.When necessary, wipe with damp cloth.
8.Store in a clean, dry and safe location out of reach of children.
9.All maintenance, service or repairs not listed in this manual are only to be attempted by a qualified ser- vice technician.
Cleaning, Maintenance, and
Lubrication
Note: Anytime inspection, maintenance and cleaning are done:
SKU 98733 | For technical questions, please call | Page 12 |