Harbor Freight Tools 98751 Symbol Definitions, Min, Ft-lb, Specific Safety Instructions

Page 5

the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.

b.Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to persons.

SAVE THESE

INSTRUCTIONS.

SYMBOLS AND

SPECIFIC SAFETY

INSTRUCTIONS

Symbol Definitions

Symbol

Property or statement

no

No-load speed

.../min

minuteRevolutions or reciprocation per

PSI

Pounds per square inch of pressure

 

 

ft-lb

Foot-pounds of torque

 

 

BPM

Blows per minute

 

 

CFM

Cubic Feet per Minute flow

 

 

SCFM

Cubic Feet per Minute flow at

standard conditions

NPT

National pipe thread, tapered

 

 

NPS

National pipe thread, straight

WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved eye protection.

Chart continued in next column.

Symbol Definitions

Symbol

Property or statement

 

WARNING marking concerning Risk

 

of Hearing Loss. Wear hearing

 

protection.

 

WARNING marking concerning Risk

 

of Respiratory Injury. Wear NIOSH-

 

approved dust mask/respirator.

 

WARNING marking concerning Risk

 

of Explosion.

 

 

Specific Safety Instructions

1.The warnings and precautions dis- cussed in this manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

2.WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and cement or other masonry products

Arsenic and chromium from chemi- cally treated lumber

Your risk from these exposures var- ies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic

SKU 98751

For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents IN-1 AIR Framing Nailer For technical questions or replacement parts, please callGeneral Safety Alert Symbol and Signal WordsWork area For technical questions, please callTool use and care Personal safetyAir source ServiceSpecific Safety Instructions Symbol DefinitionsSymbol Property or statement MinSave These Instructions Vibration PrecautionsTo Prevent Safety InformationExplosion OperationFor technical questions, please call 1-800-444-3353. Air Tool & Spray Gun Portable SetupFor technical SetupAir Tool Spray Gun Stationary Questions, please call 1-800-444-3353.To Prevent Serious Injury Testing the Full Sequential Safety Trip MechanismOperation SKU For technical questions, please call Loading NailsAbove Operating NailerClearing Jams SKU 98751 For technical questions, please call To Prevent Serious Injury From Accidental OperationTo Prevent Serious Injury from Tool Failure Problem Possible Causes Likely Solutions TroubleshootingDescription Quantity Parts ListPARTS ListPart Description Assembly Diagram Parts DiagramMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800 Day Warranty