General safety advice for electrical power tools
b)Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired.
c)Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This pre- caution is intended to prevent you from uninten- tionally starting the device.
d)When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not famil- iar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people.
e)Look after the device carefully. Check that moving parts are working prop- erly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have dam- aged parts repaired before you use the device. Many accidents have their ori- gins in poorly maintained electrical power tools.
f)Keep cutting tools clean and sharp. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
g)Use the electrical power tool, accesso- ries, inserted tools etc. in accordance with these instructions and
advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations.
Safety advice relating specifically to this device
Avoiding the danger of injury, fire and damage to your health:
Securely support the workpiece. Use clamps or a vice to grip the workpiece firmly. This is much safer than holding it in your hand.
Always switch on the electrical power tool be- fore placing it against the workpiece. There is also the risk of kickback.
Keep you hands away from the area of the saw blade. Do not grip the underside of the workpiece. Contact with the saw blade 14 may result in the risk of injury.
Make sure that the base plate 9 lies on the workpiece when sawing.
If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Always work with the mains lead leading away from the rear of the device. WARNING! NOXIOUS FUMES! Working with harmful / noxious dusts represents a risk to the health of the person operating the device and to anyone near the work area.
Wear protective glasses and a dust mask!
Do not saw materials containing substances harmful to health.
Do not saw materials containing asbestos. Asbestos is a known carcinogen.
When sawing wood and in particular when working on materials that give rise to dusts that are hazardous to health, the device must be connected to a suitable dust extraction device. Make sure you have adequate ventilation.
Do not work on moistened materials or damp surfaces.
Switch off the electrical power tool after com- pleting each stage of work but do not with- draw the saw blade 14 from the cut until after it has come to a standstill.
After switching off do not brake the saw blade
14by pressing it sideways against an object. It could cause the saw blade 14 to be dam- aged, break or initiate a kickback.
GB/IE/CY
9