Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Assembly Instructions
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Loading the Staples
1.Pinch the clip located on the end of the Magazine Unit (2). Pull out the Magazine Unit
2.Insert a full strip of staples into the Staple Channel (3). Insert the staples into the Staple Channel (3) with the sharp staple tips facing up in the Staple
3.Push the Magazine Unit (2) back into the Staple Gun Body (1). Make certain that the Magazine Unit (2) is pushed all the way back into place before operating the Staple Gun.
Magazine Unit (2)
Figure 1
SKU 95718 | For technical questions, please call | Page |