| Staple tips |
Staple Channel (3) | face upward |
Figure 2 |
|
Operating the Staple gun
1.Determine whether or not the object being stapled will necessitate extra force from the Staple Gun. This will depend primarily on the thickness of the item being stapled. For instance, a large pad of papers will need more force than one or two sheets being stapled together.
2.Set the Force Selection Lever (4) to either “Normal” or
Force Selection
Lever (4)
Figure 3
3.Place the item that you desire to staple below the Driver located on the front of the Staple Gun.
4.Grasp the Staple Gun with your fingers inserted into the opening in the middle of the Staple Gun (1) and your palm resting on the Release Lever (5). Squeeze and pull down on the Release Lever (5) to fire a staple.
SKU 95718 | For technical questions, please call | Page |