5.If the tool requires more force to accomplish the task, verify that the tool receives sufficient, unobstructed airflow (CFM) and increase the pressure
(PSI) output of the regulator up to the maximum air pressure rating of this tool.
CAUTION! TO PREVENT TOOL AND ACCESSORY FAILURE, RESULTING IN INJURY: Do not exceed the tool’s maximum air pressure rating.
If the tool still does not have sufficient force at maximum pressure and sufficient airflow, then a larger tool may be required.
Note: While working on roofs, tar and dirt may build up on the Nose of the Roofing Nailer. This can prevent normal operation. Remove buildup with a nonflammable solvent. NEVER use gasoline or other flammable solvents. Do not immerse the Roofing Nailer in an approved solvent beyond the height of the nail heads, to avoid getting the solvent into the drive cylinder of the tool. Dry off the Roofing Nailer before use; any oil film left after cleanup will accelerate tar buildup.
6.After use, to prevent accidents:
a.Release the trigger.
b.Detach the air supply.
c.Attempt to fire the Tool into a piece of scrap wood to ensure that it is incapable of firing any fasteners.
d.Release the trigger again.
e.Clean external surfaces with clean, dry cloth.
f.Store indoors out of children’s reach.
Page 14 | For technical questions, please call | SKU 68024 |