Harbor Freight Tools 68024 Save this Manual, Safety Alert Symbol and Signal Words

Page 2

SAVE THIS MANUAL

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Alert Symbol and Signal

Words

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol, is

used to address practices not related to personal injury.

 

 

 

 

Symbol Definitions

 

 

Symbol

Property or statement

PSI

Pounds per square inch of pressure

 

 

CFM

Cubic Feet per Minute flow

 

 

SCFM

Cubic Feet per Minute flow at

standard conditions

NPT

National pipe thread, tapered

 

 

NPS

National pipe thread, straight

 

 

 

WARNING marking concerning Risk of

 

Eye Injury. Wear ANSI-approved safety

 

goggles with side shields.

 

Warning marking concerning Risk of

 

Puncture Injury. Wear heavy-duty

 

work gloves.

 

Read the manual before set-up

 

and/or use.

 

 

 

WARNING marking concerning Risk of

 

Hearing Loss. Wear hearing protection.

 

 

 

WARNING marking concerning Risk

 

of Respiratory Injury. Wear NIOSH-

 

approved dust mask/respirator.

 

WARNING marking concerning Risk

 

of Explosion.

 

 

 

ImportantIMPORTANTSafety InstructionsSAFETY S

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY

TO PERSONS

Page 2

For technical questions, please call 1-800-444-3353.

SKU 68024

Image 2
Contents Coil Roofing Nailer Save this Manual Safety Alert Symbol and Signal WordsSymbol Property or statement For technical questions, please callWork area Personal safetyGeneral Air source ServiceTool use and care Specific Safety Instructions Specific InstructionsVibration Precautions Functional Description InitialassemblySpecifications UnpackingCall SetupGun Portable Questions, please call SKU 68024 For technicalAir Tool Spray Gun Stationary Nail Penetration Depth Adjustment Contact Safety Trip Bump Fire Mechanism Testing Procedure Work Piece and Work Area Set UpContact Safety Trip Bump Fire Mechanism Definition Operating InstructionsTool must cycle fire only once Single Sequential Safety Trip Mechanism DefinitionSingle Sequential Safety Trip Mechanism Testing Procedure To Prevent Serious InjuryGeneral Operating Instructions Roofing Gauge AdjustmentLoading the Tool SKU Clearing Jams User-Maintenance InstructionsUSER-INSTRUCTIONS To Prevent Serious Injury from Tool FailurePlease Read the Following Carefully Record Product’s Serial Number HereTroubleshooting Problem Possible Causes Likely SolutionsPart Description Parts ListPart Description ’ty ’ty For technical questions, please callAssembly Diagram Limited 1-Year Warranty