Trigger Installation
Note: This tool includes an additional trigger | Spring | |
to allow another triggering option. | ||
| ||
Full |
| |
• The black Trigger enables single- | Trigger | |
sequential operation. | ||
| ||
This operation is safer and should be |
| |
used whenever practical. |
|
• The red Trigger enables contact trip / | 4. | Place Spring into desired Trigger. | |
bump fire operation. | |||
|
| ||
This operation is more dangerous. |
| Valve Stem | |
Only a skilled operator who is aware |
|
| |
of the hazards and uses proper, safe |
| Trigger | |
work practices should use contact |
|
| |
trip / bump fire operation. |
|
|
1.WARNING! To prevent serious injury from accidental firing, disconnect air supply, point nailer in a safe direction, and release pressure before changing trigger.
Rubber
Spring
Lever
5. Hold down Spring and Lever while |
Ring
Pin
Spring
placing Trigger over valve stem. |
Pin
Lever Trigger
2.Remove Pin and Rubber Ring from current Trigger.
3. Remove current Trigger. Remove Spring 6. and store unused Trigger in secure dry place.
Rubber
Ring
Insert Pin, and place Rubber Ring over end of Pin.
REV 10g |
|
|
SKU 67450 | For technical questions, please call | Page 11 |