Specifications

Charger input:	230 –240V ~ 50Hz 62W
output:	18Vdc, 2.2A
Charging time:	1 hour approx.
Battery capacity:	1.5 Ah
Nominal battery voltage:	18V
No load speed:	0 –16000 min-1
Hammer rate:	0 –5500 min-1
Nail length:	40mm (1-5/8") to 150mm (6")
Nail type:	Accepts all commonly
	available nail types including
	oval brad nails, round shank
	nails and serrated nails
Nail head size:	Maximum of 10mm
Depth of nail (The value
given is approximate only
as the depth will depend
on the hardness of the
wood into which the nail
is driven):
Position 1:	Nail head underflush by 1mm
Position 2:	Nail head level with surface
Position 3:	Nail head 5mm proud
	from surface
Position 4:	Nail head 10mm proud
	from surface
Sound pressure value:	96 dB(A)
Net weight
(including 1 battery pack):	2.9kg

General safety rules

WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock,

fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

Save these instructions 1. Work area

a. Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.