Jenn-Air G18Y07P-02, 720-0511 manual Cleaning Method, Bulb Specification

5.Use a screwdriver to loosen the two screws locking the bulb. Pull out the light bulb and replace with a new bulb.

6.Reverse the instruction from steps 5-1 for installation.

Cleaning Method

Follow steps 1-4 above for glass cover removal. Use a damp towel to clean the surface of glass cover. Make sure the glass cover is completely dry before re-installing.

WARNING

Make sure the light switch is on “OFF” position and power plug is disconnected from power outlet prior to cleaning the glass cover.

WARNING

The light glass cover should not be in contact with water or any other liquid when it’s warm. Sudden change of temperature may cause cracks on glass cover.

Bulb Specification

Bulb Type: Halogen

Wattage: 10 watts per bulb

Voltage: 12 volts

Please contact customer service at 1-800-554-5799 for assistance on bulb replacement information.

WARNING

To ensure continued protection against electric shock:

1.Connect to properly grounded outlets only.

2.Do not expose to rain.

3.Keep extension cord connections dry and off the ground.

20