Sear Burner

Sear Burner

1.If you have already attempted to light the searing side burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.

2.Insert a match into the lighting rod. Ignite the match and insert through the cooking grid to the burner.

3.Press the control knob and rotate left to the “IGNITE/HI” setting, continue to press the knob until the burner ignites. The burner should light immediately.

4.If the burner does not light within 4 seconds turn the knob to the “OFF” position, wait 5 minutes and try again.

Lighting Rod

17

Page 19
Image 19
Jenn-Air 720-0511, G18Y07P-02 manual Sear Burner