Global Machinery Company TTS5000M instruction manual Know your product

Page 10

Know your product	12.		Base plate			22.	Retractable lower blade guard
1. Laser light assembly	13.		Depth locking lever			23.	Blade guard lever
2. Trigger switch	14.		Depth of cut indicator			24.	Water inlet tube
3. Lock off button	15.		Spindle lock button			25.	Water cock
4. Laser light on/off button	16.		Disc/Blade			26.	Water distribution tube
5. Motor housing	17.		Hex key for blade bolt			27.	Parallel fence slots
6. Main handle	18.		Blade bolt			28.	Water tube plug
7. Front handle		19a. 90° Blade guide notch				29.	Residual Current Device (RCD)
8. Bevel adjustment lever		19b. 45° Blade guide notch				30. Timber cutting blade
9. Bevel scale	20.		Upper blade guard			31.	Masonry cutting blade
10. Parallel fence locking knob	21.		Water system port plug			32.	Dust extraction adaptor
11. Parallel fence			2	3	6
7	4						11	15

Image 10

Contents 1400W Contents Introduction Description of symbolsSpecifications Environmental protectionPersonal safety General safety rulesKeep work area clean and well lit. Cluttered and dark Use safety equipment. Always wear eye protectionPower tool use and care Additional safety rules for laser lightsDo not use the power tool if the switch does not turn Additional safety rules for tile and timber cutting saws Additional safety rules When using water Cooling system‘Testing your safety switch’ for further details Testing your safety switch Causes and operator prevention of kickback Protruding blade may cut objects that can cause kickbackAssembly AccessoriesUnpacking Know your product Selecting the correct blade OverviewChanging the disc / blade Using the water system Adjusting the cutting depthOperation Switching on and off Adjusting the bevel angleUsing the Redeye system Making a cut Making a plunge cutMaintenance Using the parallel fenceFitting the dust extraction adaptor Testing your safety switch Power cord and RCD maintenanceTroubleshooting General inspectionPage Page Page GMC customer assist