Global Machinery Company TTS5000M instruction manual Accessories, Unpacking, Assembly

Page 9

Accessories

The GMC TTS5000M Tile/Trim Saw is supplied with the following accessories as standard:

•Residual Current Device (Fitted)

•125mm Diamond Turbocut Blade (Fitted) for wet tile/masonry cutting ONLY

•125mm 24-teeth TCT Blade for timber cutting ONLY

•Water Cooling System (Fitted)

•Parallel Guide

•Hex Key for Blade Bolt

•Dust Extraction Adaptor for Timber Cutting

•Carry Case

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Assembly

The GMC Tile/Trim Saw is packed and fully assembled (with tile cutting disc/blade) except for the rip fence.

9

Image 9

Contents 1400W Contents Specifications Description of symbolsIntroduction Environmental protectionKeep work area clean and well lit. Cluttered and dark General safety rulesPersonal safety Use safety equipment. Always wear eye protectionAdditional safety rules for laser lights Power tool use and careDo not use the power tool if the switch does not turn Additional safety rules When using water Cooling system Additional safety rules for tile and timber cutting saws‘Testing your safety switch’ for further details Testing your safety switch Protruding blade may cut objects that can cause kickback Causes and operator prevention of kickbackAccessories AssemblyUnpacking Know your product Overview Selecting the correct bladeChanging the disc / blade Adjusting the cutting depth Using the water systemAdjusting the bevel angle Operation Switching on and offUsing the Redeye system Making a plunge cut Making a cutUsing the parallel fence MaintenanceFitting the dust extraction adaptor Troubleshooting Power cord and RCD maintenanceTesting your safety switch General inspectionPage Page Page GMC customer assist