Global Machinery Company BS7 instruction manual Contents

Page 2

Contents

Warranty

2

Introduction

3

 

 

Specifications

3

 

 

Safety instructions

3

 

 

Additional safety rules for saws

5

 

 

Unpacking

6

 

 

Assembly

6

 

 

Know your product

7

 

 

Setting up

8

 

 

Operation

10

 

 

Maintenance

11

 

 

Repairs

11

 

 

Full 2 Years Home Use Warranty

Whilst every effort is made to ensure your complete satisfaction with this tool, occasionally, due to the mass manufacturing techniques, a tool may not live up to our required level of performance and you may need the assistance of our service department.

This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be replaced free of charge with another of the same item. A small freight charge may apply.

The warranty replacement unit is only made available by returning the tool to the place of purchase with a confirmed register receipt. Proof of purchase is essential. We reserve the right to reject any claim where the purchase cannot be verified.

This warranty does not include damage or defects to the tool caused by or resulting from abuse, accidents, alterations or commercial or business use.

It also does not cover any bonus accessories unless the tool is a GMC Platinum Professional model.

Please ensure that you store your receipt in a safe place. Conditions apply to the above warranty.

If you need direction of what constitutes a free of charge warranty claim, please review the guide given on the rear of the Receipt Holder. An indication is given as to the types of claim that are permissible, and those that are not.

Image 2
Contents 150mm Contents Gross weight 10.5 kg SpecificationsSafety instructions Width of throat 150 mm Cutting depth Cutting widthPage Additional safety rules for saws Damage to the lungs if an effective dust mask is not wornMounting AssemblyUnpacking Insert the table insertLamp Protractor Know your productUpper blade guide Upper blade support head not shown 17 19 16Electrical installation Setting upSetting the table square with the saw blade Centring the tableSaw is supplied with a general-purpose woodcutting blade Dust collectionChanging the saw band Wing nutSwitching on and off Adjusting the blade support headsSetting the cutting height Saw table tiltCutting Using the rip fenceMaintenance General inspectionSave this Manual for future reference