Dear Customer
If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.
Introduction
Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.
You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.
Caution. Carefully read through this entire Instruction Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
WARNINGS.
1.It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces.
2.When storing the tool, remove the batteries in case of leakage.
3.Batteries or damage due to leaking batteries are not covered under warranty.
Symbols
The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
Wear hearing protection. Wear eye protection. Wear breathing protection.
Conforms to EMC regulations.
Specifications
Nominal voltage: | |
Power: | 650W |
Speed: | |
Blade size: | 180mm Diamond blade |
Bore size: | 16mm |
Bevel capacity: | 0° to 45° |
Maximum Cutting Depth at 90°: 35mm | |
Maximum Cutting Depth at 45°: 21mm | |
Table Size: | 420mm x 360mm |
Laser class: | 2 |
Laser wavelength: | 650nm |
Laser output power: | ≤1mW |
Batteries: | 2 x AAA |
3