Sony SDM-X52, SDM-X72, SDM-X82 manual Specifications, SDM-X72/X82

Specifications

SDM-X52

LCD panel	Panel type: a-Si TFT Active Matrix
	Picture size: 15.0 inch
Input signal format	RGB operating frequency*
	Horizontal: 28 – 61 kHz
	Vertical: 56 – 75 Hz
Resolution	Horizontal: Max.1024 dots
	Vertical: Max.768 lines
Input signal levels	Analog RGB video signal
	0.7 Vp-p, 75 Ω, positive
	SYNC signal
	TTL level, 2.2 kΩ,
	positive or negative
	(Separate horizontal and vertical,
	or composite sync)
	0.3 Vp-p, 75Ω, negative
	(Sync on green)
	Digital RGB (DVI) signal: TMDS
	(Single link)
Power requirements	100 – 240 V, 50 – 60 Hz,
	Max. 0.7 A
Power consumption	Max. 28 W
Operating temperature	5 – 35 °C
Dimensions (width/height/depth)
	Display (upright):
	Approx. 392 × 358 × 199 mm
	(15 1/2 × 14 1/8 × 7 7/8 inches)
	(with stand)
	Approx. 392 × 299 × 73 mm
	(15 1/2 × 11 7/8 × 2 7/8 inches)
	(without stand)
Mass	Approx. 4.8 kg (10 lb 9 oz) (with
	stand)
	Approx. 3.5 kg (7 lb 11 oz)
	(without stand)
Plug & Play	DDC2B
Accessories	See page 7.

SDM-X72/X82

LCD panel	Panel type: a-Si TFT Active Matrix
	Picture size: 17.0 inch (SDM-X72)
	Picture size: 18.1 inch (SDM-X82)
Input signal format	RGB operating frequency*
	Horizontal: 28 – 92 kHz
	Vertical: 56 – 85 Hz
Resolution	Horizontal: Max.1280 dots
	Vertical: Max.1024 lines
Input signal levels	Analog RGB video signal
	0.7 Vp-p, 75 Ω, positive
	SYNC signal
	TTL level, 2.2 kΩ,
	positive or negative
	(Separate horizontal and vertical,
	or composite sync)
	0.3 Vp-p, 75Ω, negative
	(Sync on green)
	Digital RGB (DVI) signal: TMDS
	(Single link)
Power requirements	100 – 240 V, 50 – 60 Hz,
	Max. 0.9 A (SDM-X72)
	Max. 1.2 A (SDM-X82)
Power consumption	Max. 40 W (SDM-X72)
	Max. 58 W (SDM-X82)
		US
Operating temperature	5 – 35 °C
Dimensions (width/height/depth)
	Display (upright):
	Approx. 438 × 410 × 227 mm
	(17 1/4 × 16 1/4× 9 inches)
	(with stand) (SDM-X72)
	Approx. 450 × 424 × 241 mm
	(17 3/4 × 16 3/4 × 9 1/2 inches)
	(with stand) (SDM-X82)
	Approx. 438 × 356 × 84 mm
	(17 1/4 × 14 1/8 × 3 3/8 inches)
	(without stand) (SDM-X72)
	Approx. 450 × 368 × 90 mm
	(17 3/4 × 14 1/2 × 3 5/8 inches)
	(without stand) (SDM-X82)
Mass	Approx. 7.1 kg (15 lb 10 oz)
	(with stand) (SDM-X72)
	Approx. 8.6 kg (18 lb 15 oz)
	(with stand) (SDM-X82)
	Approx. 5.3 kg (11 lb 11 oz)
	(without stand) (SDM-X72)
	Approx. 6.5 kg (14 lb 5 oz)
	(without stand) (SDM-X82)
Plug & Play	DDC2B
Accessories	See page 7.

*Recommended horizontal and vertical timing condition

•Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger.

•Horizontal blanking width should be more than 2.5 µsec.

•Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

23