7
US
Setup
Before using your monitor, check that the following items are
included in your carton:
•LCD display
Power cord
HD15-HD15 video signal cable (analog RGB)
DVI-D video signal cable (digital RGB)
Audio cord (stereo miniplug)
Windows Utility/Macintosh Utility Disk
Warranty card
This instruction manual

Setup 1:Connect a computer

equipped with the DVI

output connector (digital

RGB)

1Remove the back cover.
2Using the supplied DVI-D video signal cable (digital
RGB), connect the computer to the monitor’s DVI-D
input connector (digital RGB) for INPUT1.

Setup 2:Connect a computer

equipped with the HD15

output connector (analog

RGB)

1Remove the back cover.
Turn off the monitor and computer before connecting.
When connecting the computer to the monitor’s HD15
input connector (analog RGB), refer to “Setup 2:
Connect a computer equipped with the HD15 output
connector (analog RGB).”
Note
Do not touch the pins of the video signal cable connector as t his might
bend the pins. Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
to the computer’s DVI output
connector (digital RGB)
to the DVI-D input
connector (digital RGB)
for INPUT1
DVI-D video signal
cable (digital RGB)
(supplied)
(continued)