Clearing Jammed
Nails
A jammed nail must be cleared before using the nailer again.
To clear a jammed nail from the dis- charge area:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Release the catch lever and slide the magazine pusher back.
3.Remove the nail stick from the maga- zine.
4.Open the nailer nose by removing the rubber nose tip, depressing the nose release mechanism, and opening the nose cover as shown in Figure 7.
Nose Release Clip |
Nose Tip |
Nose Cover |
Figure 7. Nose opened to clear a jam.
5.Dislodge the jammed nail with a tool that will fit in the slot on the underside of the nose.
6.Throw the damaged nail away and insert a new nail stick that only contains clean, undamaged nails. DO NOT use dirty or damaged nails!
7.Slide the pusher back until it locks into position.
T21347 2" Nailer Kit |