OPERATIONS
Loading
When replacing nails in your Model H8235 framing and brad nailers follow these guidelines:
Framing Nailer
Nail Size | 1⁄8" Shank Diameter |
Nail Strip Angle | 21º Round Head |
Length | |
Magazine Capacity | 60 Nails |
To load your framing nailer:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Grip the nailer firmly and point the nose down, then pull the magazine pusher back until the catch lever engages, as shown in Figure 3.
Pusher
Figure 3. Sliding magazine pusher back
and engaging catch lever.
3.Insert a strip or two of nails, pointed- end down, into the magazine as shown in Figure 4.
Figure 4. Loading nails into the magazine.
4.Tilt the nailer to slide the nails all the way down to the nose.
5.With one hand on the magazine pusher for control, release the magazine catch and slowly allow the pusher to press against the nails.
Brad Nailer
Nail Size | 18 Gauge |
Nail Length | |
Magazine Capacity | 100 Nails |
To load your brad nailer:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Press the magazine latch toward the front of the nailer, as shown in Figure 5.
Figure 5. Pressing the magazine latch.
Model H8235 |