OPERATIONS
Loading
Framing Nailer
Nail Size | 1⁄8" Shank Diameter |
Nail Strip Angle | 34º Round Head |
Length | |
Magazine Capacity | 60 Nails |
To load your framing nailer:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Grip the nailer firmly and point the nose down, then pull the magazine pusher back until the catch lever engages, as shown in Figure 3.
Figure 4. Loading nails into the magazine.
4.Tilt the nailer to slide the nails all the way down to the nose.
5.With one hand on the magazine pusher for control, release the magazine catch and slowly allow the pusher to press against the nails.
Pusher
Figure 3. Sliding magazine pusher back
and engaging catch lever.
3.Insert a strip of nails, pointed-end down, into the magazine as shown in Figure 4.
Finish Nailer
Nail Size | 16 Gauge |
Nail Length | |
Magazine Capacity | 74 Nails |
To load your finish nailer:
1.DISCONNECT NAILER FROM THE AIR SUPPLY!
2.Grip the nailer firmly, and pull the magazine pusher back until the catch lever engages, as shown in Figure 5.
Figure 5. Sliding magazine pusher back.
Model H8232 |