Introduction, Machine Description Manual Accuracy

INTRODUCTION

Machine Description		Manual Accuracy

This 12" Vise-Mounted Pan & Box Brake is designed for small bending projects (such as boxes, pans, and trays) in sheet metal that is 22 gauge or thinner.

When secured in a sturdy bench-mounted vise, four fingers of different lengths can be arranged in a variety of combinations to make 90° bends of varying widths up to 12" wide. The adjustable fingers also permit the sides of a box to be bent without interfering with previously bent sides.

Contact Info

We stand behind our machines. If you have any questions or need help, use the information below to contact us. Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster.

Grizzly Technical Support 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663

Email: techsupport@grizzly.com

We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback.

Grizzly Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: manuals@grizzly.com

We are proud to provide a high-quality owner’s manual with your new machine!

We made every effort to be exact with the instruc- tions, specifications, drawings, and photographs contained inside. sometimes we make mistakes, but our policy of continuous improvement also means that sometimes the machine you receive will be slightly different than what is shown in the manual.

if you find this to be the case, and the difference between the manual and machine leaves you confused about a procedure, check our website for an updated version. We post current manuals and manual updates for free on our website at www.grizzly.com.

Alternatively, you can call our technical support for help. Before calling, please write down the Manufacture Date and Serial Number stamped into the machine id label (see below). this infor- mation helps us determine if updated documenta- tion is available for your machine.

Manufacture date

serial Number

To reduce your risk of serious injury, read this entire manual BEfORE using machine.

-2-	Model T10726 (Mfg. Since 12/12)