Grizzly H7826 owner manual Operations, Oiling Nailer Loading Nailer, To load your nailer

Page 11

SECTION 3: OPERATIONS

Oiling Nailer

 

Loading Nailer

 

 

 

 

 

 

Pneumatic oil has been included with this Grizzly nailer to help maintain its useful life. Place several drops of oil in the nailer air inlet (as shown in Figure 3) before every use and several times a day if used continuously. Wipe off any excess oil near the nailer exhaust to avoid dust build-up. When the oil that was included with the nailer has been completely used, replace with Grizzly Model G2820 Pneumatic Tool Oil.

Figure 3. Lubricating nailer via air inlet.

Another option to manual oiling would be to install a lubricator, or a filter/lubricator/ regulator unit, in your air compressor line. If your air compressor line already has a lubricator, then regular lubrication of your nailer will not be necessary. Just make sure there is always pneumatic tool oil in the lubricator.

When replacing nails in your Model H7826, follow these guidelines:

Nails:

L-shaped cleat nails

Length:

112"–2"

Capacity: 100

Note: Use 112" nails to install 12" flooring. Use 2" nails to install 34" flooring.

To load your nailer:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Slide a strip of nails, pointed-end down, into the magazine as shown in Figure 4.

Figure 4. Loading nails into nailer.

3.Push the button inside the pusher (inset photo in Figure 4), pull the pusher all the way back, then allow the pusher to slide forward against the nail strip.

Model H7826 Flooring Nailer

-9-

Image 11
Contents Model H7826 Flooring Nailer Table of Contents Machine Data IntroductionForeword Contact Information Mation about proper operation of the equipment SafetySafety Instructions For Pneumatic Tools Before Operating This EquipmentSafety Instructions For Pneumatic Tools Additional Safety Instructions for Nailers Model H7826 Flooring Nailer Model H7826 Inventory Figure SetupUnpackingInventory Compressed Air System To check the firing mechanism Firing MechanismTo load your nailer OperationsOiling Nailer Loading Nailer To operate your nailer Operating NailerTo clear a jammed nail from the dis- charge area Clearing Jammed NailsCleaning MaintenanceCover Exhaust Cover Symptom Possible Cause Solution TroubleshootingDescription PartsWarranty and Returns Warranty Card BOX BELLINGHAM, WA Name Street CityStateZip