Grizzly XIII. Tool Data, Grizzly Model G3690 Angle Finish Nailer, Operating Air Pressure

Page 16

XIII. TOOL DATA

GRIZZLY MODEL G3690 ANGLE FINISH NAILER

Operating Air Pressure:
Softwood:	80 to 100 PSI
Maximum Air Pressure	120	PSI
Hardwood:	90 to 120	PSI
Maximum Air Pressure	120	PSI
Nail Length:	1-1/2" to 2-1/2" Clipped Head Finish Nails
Nail Gauge:	14 or 15
Magazine Capacity:	100 @15 Ga. or 90 @ 14	Ga.
Construction:	Cast Aluminum and Hardened Steel
Coupling System:	1/4" NPT
Recommended Lubricating Oil:	Pneumatic Tool Oil
Gun Weight:	5.95 lbs.
Parts and Accessories:

A rebuilding kit is available from Grizzly and includes all O-rings. The rebuilding kit and other parts can be individually ordered through the appropriate service department.

Grizzly also carries an air hose, an in-line regulator/filter/water-separator/lubricator, quick con- nect couplers, and a complete line of fasteners for this gun. Please refer to a current Grizzly cat- alog for price and ordering information.

Specifications, while deemed accurate, are not guaranteed.

G3690 Grizzly Imports, Inc. - 13 -

Image 16

Contents Angle Finish Nailer Model G3690Page Table of Contents Introduction II. CommentaryIII. Safety Rules for Nail Guns Wear Respiratory ProtectionIV. Unpacking AIRAIR Pressure AIR QualityCleaning VI. PRE-USE ChecksVII. Operations OilingConnecting to AIR Unloading FastenersTest Firing Routine USEShows using the gun for a horizontal application Routine USE CONT’DVIII. Inspection Inspect and maintain the following items dailyJamming IX. MaintenanceTo repair a jam Rings and RE-ASSEMBLY Damaged DriverTo remove the driver To re-assemble the gunTesting After Assembly TroubleshootingTo initially test the gun after a repair pro- cedure Limited Warranty XI. Warranty and ReturnsXII. Closure Parts and Accessories XIII. Tool DataGrizzly Model G3690 Angle Finish Nailer Operating Air PressureXIV XV. Parts List REF# PART# DescriptionXVI. Index Damaged Driver