Grizzly H6145 instruction manual USE a Grounded Extension Cord Rated for

Page 3

6.ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PER- SONNEL TO OPERATE MACHIN- ERY. Make sure operation instruc- tions are safe and clearly under- stood.

7.KEEP CHILDREN AND VISITORS AWAY. Keep all children and visi- tors a safe distance from the work area.

8.MAKE WORKSHOP CHILD PROOF. Use padlocks, master switches, and remove start switch keys.

9.NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power OFF and allow all moving parts to come to a complete stop before leaving machine unattended.

10.DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist.

11.KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shad- ows may cause accidents.

12.USE A GROUNDED EXTENSION

CORD RATED FOR THE

MACHINE AMPERAGE. Undersized cords overheat and reduce voltage. Replace extension cords if they become damaged. DO NOT use extension cords for 220V machinery.

13.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING MACHINERY. Make sure switch is in OFF position before reconnecting.

14.MAINTAIN MACHINERY WITH CARE. Keep blades sharp and clean for best and safest per- formance. Follow instructions for lubricating and changing acces- sories.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Make a habit of checking for keys and adjust- ing wrenches before turning ON machinery.

16.CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY. Check for binding and align- ment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect machine operation. Repair or replace damaged parts.

17.USE RECOMMENDED ACCESSORIES. Refer to the instruction manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

18.DO NOT FORCE MACHINERY. Work at the speed for which the machine or accessory was designed.

H6145 28° Clipped Head Framing Nailer

-1-

Image 3
Contents Clipped Head Framing Nailer Safety Safety Instructions for MachineryBefore Operating This Equipment USE a Grounded Extension Cord Rated for Additional Safety Instructions for Nailers H6145 28 Clipped Head Framing Nailer Introduction Foreword Contact InfoMachine Data UnpackingInventory SET UPCompressed Air System Disconnect Nailer from the AIR Supply Safety YokeOperations LoadingOperating Adjusting Depth Nails To operate your nailer in single fire modeReplacing Pistons/O Rings CleaningLubricating Cleaning & LubricationH6145 Parts Description H6145 Parts ListProblem Cause Action TroubleshootingWarranty and Returns Warranty Card Place Stamp Here