Astro Pneumatic 68127 Assembling the Rubber Foot and Wheels, Assembling the Handle, See Figures 4

ASSEMBLY

ASSEMBLING THE RUBBER FOOT AND WHEELS

See Figure 3.

Mount the rubber feet as shown in figure.

Tighten firmly with an open-end wrench (not included) to secure it in position.

Mount the wheels as shown in figure.

Tighten firmly with an open-end wrench (not included) to secure the wheels in position.

WASHER
NUT	NUT
	WASHER(s)

RUBBER

FOOT

WASHER

SCREW

WHEEL SCREW

Fig. 3

ASSEMBLING THE HANDLE

See Figures 4 - 5.		HANDLE
	Lower the handle onto the compressor body, as shown
	in Figure 4.
	Line the holes of the handle with the ones on the slots
	of the compressor. Then insert the two knobs and
	tighten firmly to secure the handle in position (Fig. 5).
		HOLE OF
		THE ANDLE

Fig. 4

KNOB

Fig. 5

12