Astro Pneumatic 68127 operating instructions Cleaning the Intake Filter

Page 18

MAINTENANCE

CLEANING THE INTAKE FILTER

See Figure 19.

The intake filter prevents dust and dirt being drawn in. It is essential to clean this filter after at least every 100 hours in service. A clogged intake filter will decrease the compressor’s performance dramatically. Undo the two allen screws. You can then remove the filter from the two halves of the plastic housing, tap it to remove the dirt, blast it down with low-pressure compressed air (approx. 3 bar) and re-insert it.

AIR FILTER

ALLEN

SCREWS

Fig. 19

18

Image 18

Contents AIR Compressor Stop Important Stop Introduction+26%07%*8=6907 General Safety Rules ServiceSpecific Safety Rules „ Drain tank of moisture after each day’s usePage =1&307 Speed and Wiring Grounding Instructions33!299/& 4%2-3 Tools NeededFeatures Product SpecificationsAssembly Assembling the Rubber Foot and Wheels Assembling the HandleSee Figures 4 Breaking in the Pump See Figures 6Using the AIR Compressor OperationApplications Checking the Safety Valve Draining the TankSee Figures 10 Check the OIL Level AT Regular Intervals MaintenanceGeneral Maintenance Changing the OILRetensioning the V-BELT Tightening of Head Tension RodsSee Figures 15 Cleaning the Intake Filter Troubleshooting Problem Possible Cause SolutionTroubleshooting Page Limited 1 Year / 90 DAY Warranty Portable Air Compressor Model No Replacement Parts List Page Portable AIR Compressor Parts LIST− Model no Code Description9039394/A