Woodstock W1775 owner manual Always USE Safety Glasses

Page 4

Model W1775 Nailer/Stapler Kit

Safety Instructions for Pneumatic Tools

10.USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching.

11.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear a protective hair covering to contain long hair.

12.ALWAYS USE SAFETY GLASSES.

Also use a face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

13.WEAR APPROVED HEARING PROTECTION. Air escaping from pneumatic tools can exceed safe exposure limits and may cause hearing damage with prolonged exposure.

14.SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.

15.MAINTAIN TOOLS WITH CARE.

Keep tools lubricated and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

16.REDUCE THE RISK OF UNINTENTIONAL FIRING. Do not carry tool with hand on trigger and always disconnect from air when not in use.

17.DISCONNECT TOOLS before servicing, changing accessories, or moving to another location.

18.DO NOT OVERREACH. Keep proper footing/balance at all times.

19.USE THE RECOMMENDED ACCESSORIES. Consult owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury.

20.CHECK FOR DAMAGED PARTS BEFORE USING. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that mayaffect machine operation. Repair or replace damaged parts.

21.NEVER LEAVE UNATTENDED TOOL CONNECTED TO AIR. Disconnect the air hose and do not leave tool until it is relieved of any built up pressure.

22.NEVER ALLOW UNTRAINED USERS TO USE THIS TOOL WHILE UNSUPERVISED.

23.IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING TOOL. Seek formal training or research books or magazines that specialize in pneumatic tools.

24.BE AWARE OF HOSE LOCATION WHEN USING PNEUMATIC TOOLS.

Hoses can easily become a tripping hazard when laid across the floor or spread out in a disorganized fashion.

-2-

Image 4
Contents NAILER/STAPLER KIT Page Safety Safety Instructions for Pneumatic ToolsBefore Operating This Equipment Information about proper operationAlways USE Safety Glasses Additional Safety for Nailers/Staplers Woodstock Technical Support IntroductionTool Data Typical filter/lubricator/regulator installation order Compressed Air SystemSetup UnpackingInventory Box Inventory Figure QtySafety Nose Mechanism To check the safety nose mechanism, do these stepsOperations LoadingOperating To load your nailer/stapler, do these stepsAdjusting Depth Clearing Jammed Nails Replacing Piston Rings To replace a piston and O-rings, do these stepsCleaning & Lubrication CleaningLubricatingParts Breakdown Parts List PART# DescriptionTroubleshooting Page Warranty Registration BOX BELLINGHAM, WA