Model W1775 Nailer/Stapler Kit
Clearing Jammed Nails
A jammed nail or staple must be cleared before using the nailer/stapler again.
To clear a jammed nail or staple from the magazine, do these steps:
1.DISCONNECT NAILER/STAPLER FROM THE AIR SUPPLY!
2.Unlock the catch lever and pull the magazine pusher back completely.
3.Locate and remove the jammed nail/staple with a pair of needle nose pliers.
4.Throw the damaged nail/staple away.
5.Inspect the nail/staple stick. If it is bent or damaged, throw it away and insert a new stick that only contains clean, undamaged nails/staples. DO NOT use dirty or damaged nails/ staples!
6.Push the magazine pusher forward to the front of the magazine until the catch lever locks.
To clear a jammed nail from the dis- charge area, do these steps:
1.DISCONNECT NAILER/STAPLER FROM THE AIR SUPPLY!
2.Unlock the catch lever and pull the magazine pusher back completely.
3.Remove the nail/staple stick from the magazine.
4.Loosen the cap screws shown in Figure 7, and remove the cover with a 3mm hex wrench. Dislodge the jammed nail/staple with a pair of needle nose pliers.
Cap Screws
Cover