Woodstock W1713 Installing Plain End Blades, To install a plain end blade, do these steps

Page 14

W1713 Owner's Manual (Mfg. Since 6/03)

SETUP

Installing Plain End Blades

The V-notches of the upper and lower blade holders are designed to hold pin-end blades. However, with the use of the blade adapters, plain end blades that do not have the mounting pins can be used with your scroll saw.

Tools Needed

Qty

Hex Wrench 4mm

1

To install a plain end blade, do these steps:

 

1.DISCONNECT MACHINE FROM POWER!

2.Rotate the blade tension knob counterclockwise to decrease the blade tension.

3.Remove the table insert.

4.Loosen the blade adapter set screws to allow the saw blade ends to slide through the adapters, as illustrated in Figure 7.

Note: The set screws can be threaded into either set of adapter holes depending on whether side cutting or straight cutting is desired.

5.Thread one set screw in until it just makes contact with the blade. Keep the other set screw loose for now, as illustrated in Figure 7.

6.Without letting the adapters slip off the ends of the blade, place them in the indents on the top arm, as illustrated in Figure 8, with the set screws that are in contact with the blade facing down.

Note: Performing Step 6 will correctly set the overall length of the assembly to properly fit on the blade holders.

7.Fully tighten the top adapter set screws to firmly secure the blade with the adapters.

8.Slide one end of the blade assembly through the table hole and place the adapter over the mounting arm of the blade holder, then press the upper blade holder down and mount the other adapter over its mounting arm (see Figure 9).

9.Replace the table insert, then properly tension the blade (refer to Adjusting Blade Tension on Page 17 for detailed instructions).

Set

Set

Screw

Screw

 

Blade

Figure 7. Plain end blade inserted and

secured into a blade adapter.

Blade Adapters

Blade

Figure 8. Blade with the blade adapters

inserted into the adapter indents.

Mounting Arm

Figure 9. Plain end blade and adapter mounted on the upper blade holder.

-12-

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OWNERS MANUAL Page Contents Woodstock Technical Support SpecificationsIntroduction About Your New Scroll SawControls and Features Safety J8=KP Standard Machinery Safety  D8BJLIL8IJ8I@EGC88ENFIBFIIKCP9=FILJ@ED8?@EIP% Additional Safety for Scroll Saws 110V Operation Electrical SpecificationsElectrical Extension CordsInventory SetupUnpacking Workbench MountingMachine Placement Cleaning MachineTools Needed Qty AssemblyTo install the blade guard, do these steps Installing Pin-End Blades To install a pin-end blade, do these stepsInstalling Plain End Blades To install a plain end blade, do these stepsTo calibrate the table tilt scale, do these steps Calibrating Table Tilt ScaleDust Collection Test Run To test run the saw, do these stepsOperations GeneralAdjusting Hold-down Shoe & Blade Guard Adjusting Air NozzleAdjusting Blade Tension Blade InformationBlade Selection Chart Blade SpeedStandard Scroll Cutting Interior Scroll CuttingMaintenance CleaningTo lubricate the arm bushings, do these steps LubricationMotor Brushes To inspect/replace the motor brushes, do these stepsService TroubleshootingW1713 Owners Main Parts List DescriptionMachine Labels Parts Page Place Stamp Here Warranty =\FjVainBVXcZhVcYIddah

W1713 specifications

Woodstock W1713 is an innovative step in the evolution of woodworking machines, designed to meet the demanding needs of modern woodworking projects. This advanced machine boasts a combination of technology, versatility, and precision that makes it an essential tool for both hobbyists and professionals alike.

One of the standout features of the W1713 is its powerful motor, which provides sufficient torque to handle a variety of woodworking tasks with ease. This ensures that whether you are ripping, cross-cutting, or shaping materials, the machine works efficiently without any compromise on quality. The robust construction of the machine also contributes to its durability, allowing it to withstand heavy usage in both home workshops and professional environments.

The machine is equipped with a user-friendly interface that simplifies operation, making it accessible to users of all skill levels. Intuitive controls allow for quick adjustments to be made while working, ensuring that users can focus on their creative endeavors without being bogged down by complicated setups. Furthermore, the W1713 includes a range of safety features designed to protect the user during operation, enhancing overall workflow confidence.

The versatility of the Woodstock W1713 is another highlight. It is compatible with a wide array of tooling, allowing woodworkers to execute a variety of cuts and finishes. This adaptability makes it an excellent choice for those who require a machine that can evolve with their individual needs and project complexity. Whether you’re working on intricate designs or straightforward cuts, the W1713 has got you covered.

In terms of technological advancements, the W1713 employs precision-engineered components that guarantee accuracy in every cut. Its advanced alignment systems ensure that every piece meets stringent specifications, minimizing the need for rework and maximizing productivity. Additionally, the machine's dust collection system is exceptionally efficient, helping to maintain a clean working environment and improving air quality.

In summary, the Woodstock W1713 represents a perfect synthesis of power, safety, and adaptability. With its impressive motor capabilities, user-friendly interface, and advanced technology, this woodworking machine empowers woodworkers to achieve high-quality results consistently. Whether for personal projects or professional use, the W1713 stands as a reliable cornerstone in any woodworking setup, embodying the essence of innovation in the craft.
Top Page Image Contents