Contents, Important Notice | Woodstock W1822 specs

INTRODUCTION

INTRODUCTION	2
Important Notice!	2
Woodstock Technical Support	3
Specifications	3
SAFETY	4
Standard Machinery Safety	4
Additional Safety for Sliding Table Saws	6
SETUP	7
Unpacking	7
Inventory	7
Assembly	8

OPERATIONS	13
Operation Overview	13
Crosscut Fence	14
Extension Fence	14
Extension Table	14
Flip Stop	15
Crosscutting	15
Miter Cutting	16
PARTS	17
Table	17
Fence	18
WARRANTY	21

SAFETY

SETUP

Important Notice!

Table Saw Modifications Required for Installation

The Model W1822 can be installed on a wide range of table saw brands and sizes; however, installation usually requires permanent modification to your table saw or its parts. This modification can include cutting, grinding, drilling, and tapping threads in metal surfaces. Read the following to determine what type of modification may be required for your saw:

•If your saw table does not have mounting holes that match those in the Model W1822, you will need to drill (and possibly tap) new holes in the saw table.

•If the fence rails on your saw prevent installation of the Model W1822, then you will need to either:

—Cut off the ends of the rails (this is the easiest and fastest option).

—Re-mount the rails farther to the right, which may also require you to drill (and possibly tap) new holes in your table and cut small notches into your rails for access to T-slots in your saw’s table.

•If the power switch on your saw is mounted on the left, you may need to re-mount it to a new location, such as the non-moving base portion of the Model W1822 or a new location on your fence rails. Remounting the switch may require drilling and tapping new holes.

Before beginning any modification to your table saw or its parts, read the entire assembly section in this manual to make sure the person making the modification is capable of performing the required tasks, and to make sure the Model W1822 will fit your saw.

OPERATIONS ACCESSORIES

PARTS

USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!