Woodstock D2260A Assembling Base & Mounting Machine, Fixed caster mounted to corner Bracket

Page 5

D2057A, D2058A, D2260A Mobile Base Instructions

Assembling Base & Mounting Machine

1.Mount the two swivel casters to the corner brackets with threaded posts­(see Figure 9), using (4)

M8-1.25 x 16 hex bolts, 8mm flat washers, 8mm lock washers, and M8-1.25 hex nuts on each.

2.Mount the two fixed casters to the remaining brackets (see Figure 10), using (4) M8-1.25 x 16 hex bolts, 8mm flat washers, 8mm lock washers and M8-1.25 hex nuts on each.

3.Orient the fixed casters so they point in the same direction that your machine will typically be moved (see Figure 11). Mounting the fixed casters in the wrong direction will make it difficult to move your mobile base.

-5-

x 4

Threaded Post

Figure 9. Swivel caster mounted to corner

bracket with threaded post.

x 4 Or x 4

Figure 10. Fixed caster mounted to corner

bracket.

(TOP VIEW OF CASTER)

Typical Direction of Movement

CORRECT INCORRECT

Figure 11. Mounting casters based upon

typical direction of movement.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Introduction Mobile Base Models D2057A, D2058A, D2260A D2259A-Mobile Base Extension Kit Available AccessoriesInventory see Figure Qty Tools Needed for AssemblyOne of four corner bracket pads Machine will sit on Preparation for AssemblyFixed caster mounted to corner Bracket Assembling Base & Mounting MachineMaximum extension line on rail Rails secured to fixed corner Brackets Foot Post Rail secured to brackets Assembling Base Around MachineMounting fixed casters to eight Hole pattern corner brackets Rear rail fixed caster assembly Secured Rear fixed caster assembly Secured to side rail Needed Materials for Base Plate Qty Making a Base PlateDisconnect the Machine from Power Using Mobile BaseRear 6RIGHT Left D2057A PartsRear 6RIGHT Left Front D2058A PartsDescription D2260A Parts
Top Page Image Contents