Woodstock W1668 manual Drill/Drum Changes, To change drill bits and sanding drums, do these steps

Page 26

W1668 131⁄4" Oscillating Drill Press

Drill/Drum Changes

OPERATIONS

NEVER troubleshoot or adjust the machine while it is running. Wait until the machine is turned off, unplugged and all working parts have come to a stop before proceeding!

To change drill bits and sanding drums, do these steps:

1.UNPLUG THE DRILL PRESS!

2.Use the chuck key to open the chuck wide enough to accept the new bit or the sand- ing drum mandrel (see Figure 40).

3.Install the bit or mandrel so the chuck jaws will grab as much of the bit or mandrel shank as it can.

•If you are installing a small drill bit, make sure it is held between three jaws instead of only two, and NEVER allow a chuck to grab the fluted body of drill bits.

•If you are installing the sanding drum, install the paper and drum before install- ing the spindle into the drill chuck (con- tact your local SHOP FOX® dealer for drums and paper).

4.Tighten the chuck with the chuck key, using any of the three key end locations. (see Figure 41).

5.Choose the insert that has an opening which is approximately 1⁄4" bigger than the sanding drum chosen. For drilling, always use the table insert (see Figure 42) with the smallest opening. A table insert is not needed when a 2" drum is used.

6.Install the chosen table insert into the pocket in the top of the table.

7.Remove the chuck key and reconnect the power source.

8.Reverse these steps to remove the drill bit or sanding drum.

-24-

Figure 40. Installing bit.

Figure 41. Chuck key engaged.

Figure 42. Sanding drum table insert.

Page 25 Page 27
Image 26
Page 25 Page 27
Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportSpecifications ⁄ 4 HP, 110V, 9 Amp., Single Phase ⁄ 60 HzJ8=KP  D8BJLIL8IJ8I@EGC88ENFIBFIIKCP9=FILJ@ED8?@EIP% Additional Safety for Drill Presses Avoiding Potential Injuries Never drill while holding Workpiece by hand110V Operation Electrical SpecificationsElectrical Extension CordsInventory SetupUnpacking Tools and Fasteners not shown QtyBase and Column To install the base and column, do these stepsTo install the dust port, do these steps Dust PortTo install the table support, do these steps Table SupportTo install the table, do these steps Rack, column, table support positionHeadstock Aligning the pocket in the headstock With the columnDrill Chuck To install the drill chuck, do these stepsTo install the handles, do these steps HandlesAdjustments Belt TensionInjury may occur if this To adjust the feed shaft spring tension, do these stepsFeed Shaft Spring Tension Quill-Shaft Screw Hold the spring cover tightlyTo adjust the table, do these steps Table Height and TiltDrilling Speed Loosening the lock knobDrilling Depth Drill Press RPM ChartTo adjust the drilling depth, do these steps Adjustments Adjustments Operations Starting Drill PressDrill/Drum Changes To change drill bits and sanding drums, do these stepsRemove the spindle handles Using the OscillatorTo use the oscillating feature, do these steps Table insert Table and Base MaintenanceGeneral Sanding SleevesTroubleshooting Wiring Diagram Drill Press Accessories Maintenance Parts W1668 Parts BreakdownParts List DescriptionTable Insert 1 I.D Warranty Registration CommentsWoodstock international inc. p.o. box Bellingham, wa N8II8EKP
Related manuals
Manual 27 pages 42.57 Kb Manual 27 pages 31.01 Kb

W1668 specifications

The Woodstock W1668 is an innovative woodwork machine equipped with advanced features and technologies designed for both professional craftsmen and hobbyists. This versatile tool stands out for its robust construction and user-friendly design, catering to a wide range of woodworking tasks.

One of the main features of the Woodstock W1668 is its powerful motor, delivering reliable performance for an array of cutting, shaping, and finishing applications. With a motor rated at 1.5 horsepower, it is capable of handling both softwoods and hardwoods with ease, ensuring that users can achieve precise results regardless of the material.

The machine is designed with an adjustable cutting height, allowing for greater flexibility when working on various projects. Whether it’s creating intricate designs or making straight cuts, the Woodstock W1668 offers the ability to fine-tune settings to achieve the desired outcomes. The inclusion of a high-visibility blade guard not only enhances safety but also provides a clear view of the workpiece, making it easier for users to monitor their progress.

Woodstock also integrates advanced dust collection features into the W1668, which is essential for maintaining a clean and safe workspace. The integrated dust port connects to compatible dust collection systems, significantly reducing airborne particles and ensuring a healthier environment for users.

Additionally, the W1668 employs a precision fence system that is easy to adjust. This feature allows for accurate and repeatable cuts, making it facilitate streamlined workflows and reducing the chance of errors. Users can trust that their measurements will be exact, which is crucial for high-quality woodworking.

The durable construction of the Woodstock W1668 includes a heavy-duty cast iron table that minimizes vibrations during operation. This stability contributes to smoother finishes and gives users confidence when tackling challenging woodworking projects. The cast iron surface also retains a flatness that provides improved support for planks and other materials.

In summary, the Woodstock W1668 is a high-performance woodworking machine characterized by a powerful motor, adjustable cutting height, advanced dust collection, and a precision fence system. Its rugged build ensures durability and reliability, making it an exceptional choice for woodworking enthusiasts looking to elevate their craft.
Top Page Image Contents