Woodstock W1668 manual Table insert

Page 28

OPERATIONS

 

 

W1668 131⁄4" Oscillating Drill Press

7. Remove the mandrel nut from the mandrel.

 

 

8. Install the sanding drum, sandpaper, and

 

 

top and bottom mandrel washers on the

 

Bottom Mandrel

mandrel, then secure with the mandrel

Insert

Washer

nut, as shown in Figure 46.

 

 

9. Choose the insert that has an opening

 

 

which is slightly bigger than the sanding

 

 

drum chosen (see Figure 46).

 

 

• For general drill bits, small reamers, and

 

 

miscellaneous small cutting and sanding

Mandrel Nut

bits, use the 5⁄8'' and the 1'' table inserts.

 

 

• For the 1'' sanding drum, use the 1 3⁄8''

Figure 46. Sanding drum table insert.

table insert.

 

 

•For the 1 1⁄2'' sanding drum, use the 1 7⁄8''

table insert.

 

Top Mandrel

 

Washer

•For the 2'' sanding drum, use no table insert.

10. Set the chosen table insert into the pocket

 

Insert

in the top of the table, insert the sanding

 

 

drum mandrel into the chuck, then tighten

 

chuck (see Figure 47).

 

11.Loosen and pivot the table so the opening in the installed table insert is centered to the drill bit or sanding drum.

Figure 47. Sanding drum installed.

NEVER sand or drill with- out the table in position and the workpiece secured. Serious person- al injury may occur.

12.Adjust the table height to use all of the grit on the paper as the paper wears.

•If the thickness of the workpiece does not allow much table movement and the sand- ing drum paper is partially worn on one end, remove the drum from the sanding spindle, turn it end for end and replace it on the sanding spindle to use the newer part of the sandpaper.

13.Turn the drill press ON, and begin sanding.

-26-

Page 27 Page 29
Image 28
Page 27 Page 29
Contents OWNERS MANUAL Page Contents Introduction Woodstock Technical SupportSpecifications ⁄ 4 HP, 110V, 9 Amp., Single Phase ⁄ 60 HzJ8=KP  D8BJLIL8IJ8I@EGC88ENFIBFIIKCP9=FILJ@ED8?@EIP% Additional Safety for Drill Presses Avoiding Potential Injuries Never drill while holding Workpiece by handElectrical Specifications Electrical110V Operation Extension CordsSetup UnpackingInventory Tools and Fasteners not shown QtyTo install the base and column, do these steps To install the dust port, do these stepsBase and Column Dust PortTo install the table support, do these steps Table SupportTo install the table, do these steps Rack, column, table support positionHeadstock Aligning the pocket in the headstock With the columnTo install the drill chuck, do these steps To install the handles, do these stepsDrill Chuck HandlesAdjustments Belt TensionFeed Shaft Spring Tension To adjust the feed shaft spring tension, do these stepsInjury may occur if this Quill-Shaft Screw Hold the spring cover tightlyTo adjust the table, do these steps Table Height and TiltDrilling Speed Loosening the lock knobTo adjust the drilling depth, do these steps Drill Press RPM ChartDrilling Depth Adjustments Adjustments Operations Starting Drill PressDrill/Drum Changes To change drill bits and sanding drums, do these stepsTo use the oscillating feature, do these steps Using the OscillatorRemove the spindle handles Table insert Maintenance GeneralTable and Base Sanding SleevesTroubleshooting Wiring Diagram Drill Press Accessories Maintenance Parts W1668 Parts BreakdownParts List DescriptionTable Insert 1 I.D Warranty Registration CommentsWoodstock international inc. p.o. box Bellingham, wa N8II8EKP
Related manuals
Manual 27 pages 42.57 Kb Manual 27 pages 31.01 Kb

W1668 specifications

The Woodstock W1668 is an innovative woodwork machine equipped with advanced features and technologies designed for both professional craftsmen and hobbyists. This versatile tool stands out for its robust construction and user-friendly design, catering to a wide range of woodworking tasks.

One of the main features of the Woodstock W1668 is its powerful motor, delivering reliable performance for an array of cutting, shaping, and finishing applications. With a motor rated at 1.5 horsepower, it is capable of handling both softwoods and hardwoods with ease, ensuring that users can achieve precise results regardless of the material.

The machine is designed with an adjustable cutting height, allowing for greater flexibility when working on various projects. Whether it’s creating intricate designs or making straight cuts, the Woodstock W1668 offers the ability to fine-tune settings to achieve the desired outcomes. The inclusion of a high-visibility blade guard not only enhances safety but also provides a clear view of the workpiece, making it easier for users to monitor their progress.

Woodstock also integrates advanced dust collection features into the W1668, which is essential for maintaining a clean and safe workspace. The integrated dust port connects to compatible dust collection systems, significantly reducing airborne particles and ensuring a healthier environment for users.

Additionally, the W1668 employs a precision fence system that is easy to adjust. This feature allows for accurate and repeatable cuts, making it facilitate streamlined workflows and reducing the chance of errors. Users can trust that their measurements will be exact, which is crucial for high-quality woodworking.

The durable construction of the Woodstock W1668 includes a heavy-duty cast iron table that minimizes vibrations during operation. This stability contributes to smoother finishes and gives users confidence when tackling challenging woodworking projects. The cast iron surface also retains a flatness that provides improved support for planks and other materials.

In summary, the Woodstock W1668 is a high-performance woodworking machine characterized by a powerful motor, adjustable cutting height, advanced dust collection, and a precision fence system. Its rugged build ensures durability and reliability, making it an exceptional choice for woodworking enthusiasts looking to elevate their craft.
Top Page Image Contents