Woodstock D4031 instruction sheet Making a Mortise, To make a mortise, do these steps

Page 3

D4031 Mortising Kit Instructions

Making a Mortise

Proper alignment of the workpiece and chisel is essential to making good mortise and tenon joints. The instructions below describe one method of creating square joints with an evenly-spaced mortise. Place a scrap board on top of the drill press table if a through-mortise is to be made.

To make a mortise, do these steps:

1.Install the chisel into the cone, rotate it so the opening is positioned toward the operator and is square to the fence, as shown in Figure 5, then secure with the knob.

2.Secure the drill bit into the drill chuck. Slide the drill bit into the chisel as far as it will go and then allow it to drop back down 132" - 116", as shown in Figure 6. If this is not done, wood chips generated by the cutting action will have no place to go, resulting in excessive heat and damage to the tool.

3.Measure the surface of the workpiece that is to have the mortise. Subtract the size of the mortise chisel and divide this number in half.

Workpiece =

0.75"

Chisel =

-0.375"

0.375" ÷ 2 = 0.1875"

4.Mark the workpiece where you want the mortise and clamp it to the fence.

5.Loosen the adjustable handles on the fence. Lower the chisel with the downfeed handles on the drill press and make adjustments to the fence until the marks on the workpiece are aligned with the chisel as in Figure 7. Tighten the adjustable handles. If the fence cannot be adjusted close enough, adjust the table on the drill press until the chisel and marks are aligned.

6.Set the speed of the drill press between 900 and

1200 RPM.

7.Carefully inspect the alignment. When you are satisfied that the setup is worthy of being tested, replace the workpiece with a scrap piece of lumber that is the same size as the workpiece. Attach the hold-down bracket and rod(s) and make a cut.

-3-

Figure 5. Example of squaring a chisel.

Figure 6. Proper drill bit depth.

Figure 7. Aligning the chisel and marks.

Image 3
Contents Inventory Figure IntroductionMounting the Fence Mounting the ConeTo make a mortise, do these steps Making a MortiseCut Sequence D4031 Parts

D4031 specifications

Woodstock D4031 is a remarkable digital synthesizer that has made a significant impact in the world of electronic music. Designed for both amateur musicians and professional producers, it epitomizes versatility and innovation in sound design. A standout feature of the D4031 is its extensive multi-format synthesis capabilities which include subtractive, additive, and FM synthesis. This allows users to create a vast range of sounds, from lush pads to sharp leads, expanding the sonic palette at their fingertips.

At the heart of the D4031 lies its powerful engine, capable of generating high-quality audio with minimal latency. With up to 128 voice polyphony, the synthesizer can handle complex musical arrangements without compromising performance. This is particularly beneficial for live performances, where the ability to layer multiple sounds is essential. The D4031’s user interface is intuitive, featuring a sleek touchscreen that provides easy access to all parameters and settings. The layout is designed to facilitate quick adjustments, making it ideal for on-the-fly creativity.

One of the D4031’s standout technologies is its advanced modulation system. It offers an array of envelopes, LFOs, and step sequencers that can be assigned to various parameters within the sound engine. This enhances the dynamic nature of sound production, allowing for intricate movements and evolving textures. Additionally, the synth comes with a comprehensive selection of onboard effects, including reverb, delay, and distortion. These effects can be applied to individual sounds or to the overall mix, providing further depth and character.

The D4031 also excels in connectivity options. It features MIDI In/Out/Thru ports, allowing for integration with other hardware instruments and controllers. USB connectivity enables seamless interaction with DAWs, facilitating easy recording and editing. Furthermore, audio outputs are versatile, ensuring that the instrument can fit into any studio setup or live rig.

In summary, Woodstock D4031 is not just a synthesizer; it’s a comprehensive music production tool that empowers artists to explore new sonic territories. With its cutting-edge technologies, extensive sound design features, and user-friendly interface, it has quickly established itself as a favorite among musicians, making it an essential addition to any electronic musician's toolkit. Whether in the studio or on stage, the D4031 promises to inspire creativity and innovation in every performance.