Woodstock D3274 owner manual Atomizing Cap and Fan Adjustments, Horns

Page 11

Model D3274 Gravity Feed Spray Gun w/Regulator

Atomizing Cap and Fan

Adjustments

The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems with properly thinned paint are caused by clogged atomizing holes on the atomizing cap horns (see Cleaning on Page 10).

Pattern

Stroke

Pattern

Control

Figure 8. Set up for horizontal spray

stroke with vertical fan pattern.

Horns

Figure 7. Atomizing cap horns.

Rotating the pattern adjustment control in Figure 8 and 9 will give you a range between the two patterns in Figure 10.

Stroke

Pattern

Pattern

Control

Figure 9. Set up for vertical spray stroke

with horizontal fan pattern.

Figure 10. Fan pattern adjustment.

-9-

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Gravity Feed Spray GUN W/REGULATOR OWNERS MANUAL Page Before Operating This Equipment SafetySafety Instructions for Pneumatic Tools Always USE Safety Glasses Disconnect Compressed AIR Additional Safety Instructions for Spray GunsWoodstock Technical Support IntroductionInventory SetupUnpacking Controls SpecificationsAssembly Spraying OperationsSpray technique Horns Atomizing Cap and Fan AdjustmentsCleaning Cleaning & LubricationFollow Steps 1-5 on LubricationTroubleshooting Symptom Possible Cause Possible Solution D3274 Parts Breakdown Description D3274 Parts ListWarranty and Returns Warranty Registration Woodstock international inc. p.o. box Bellingham, wa
Top Page Image Contents