V. Maintenance
Because there are no moving parts, maintenance is vir- tually eliminated. However, we do make the following recommendations:
•Give the table a shot of some type of protec- tive coating. Many types of machine table coatings are available on the market today. These will keep the table surface in prime condition and reduces friction when feeding material.
•Periodically check all bolts and fasteners to make sure that they are tight.
•Periodically check the router insert and ensure that it is flush to The Rebel® table. Ensure that the router is firmly mounted to the router insert.
•Inspect the router, especially the collet. Ensure that the collet tightens securely around the router bit.
Any maintenance performed on The Rebel® should be only done after the router has been turned off and the cutter has come to a complete stop and the plug pulled from the outlet. Failure to do so may result in serious personal injury.