Woodstock owner manual Setup, Unpacking, Model W1774 Inventory Qty

Page 8

Model W1774 18 Gauge Brad Nailer

SETUP

Unpacking

This brad nailer has been carefully packaged for safe transportation. If you notice the tool has been damaged during shipping, please contact your authorized Shop Fox dealer immediately.

Inventory

The following is a description of the main components shipped with the Model W1774. Lay the components out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the tool or examine the packaging materials carefully. Occasionally we pre-install certain components for safer shipping.

C

B

A

D

		E

Model W1774 Inventory		Qty
A.	Brad Nailer	1
B.	Hex Wrench 3mm	1
C.	Hex Wrench 4mm	1
D.	Safety Glasses	1
E.	Carrying Case	1
	-6-

Image 8

Contents Gauge Brad Nailer Page Before Operating This Equipment SafetySafety Instructions for Pneumatic Tools Always USE Safety GLASSES. Also use a face or dust mask Additional Safety for Nailers/Staplers Machine Data IntroductionWoodstock Technical Support Typical filter/lubricator/regulator installation order Compressed Air SystemSetup UnpackingInventory Model W1774 Inventory QtySafety Nose Mechanism To check the safety nose mechanism, do these stepsOperations LoadingOperating To load your nailer, do these stepsExample of nail deflection Clearing Jammed Nails Replacing Pistons Rings To replace a piston, do these stepsCleaning & Lubrication CleaningLubricatingBreakdown W1774 Parts List PART# DescriptionTroubleshooting Page Warranty Registration BOX BELLINGHAM, WA