Delta DBS125, DNS100, DBN125 instruction manual Clearing a Jammed Fastener

Page 11

CLEARING A JAMMED FASTENER

Disconnect tool from air supply.

1.Open magazine and remove remaining fasteners (Fig. 28 and Fig. 29).

Remove fasteners from tool before opening the fastener guide plate. Fasteners are under pressure and may shoot out of magazine which could cause injury.

2.Open the quick release latch and the fastener guide plate (Fig. 30).

3.Remove the jammed fastener (Fig. 31).

4.Close the fastener guide plate, and the quick release latch.

Fig. 28

Fig. 29

Fig. 30

Fig. 31

Image 11

Contents Brad Nailer/Stapler Date of Manufacture Important Safety Instructions Safety Guidelines / DefinitionsGeneral Safety Rules Page Page Functional Description Power SourceEMPLOYER’S Responsibilities Preparing the Tool Operating Instructions Using the ToolRubber Nose Cushion Clearing a Jammed Fastener Service and Repairs MaintenanceClean and Inspect Daily Symptom Problems TroubleshootingAccessories Two Year Limited New Product WarrantyCanadian PORTER-CABLE Delta Service Centers