RIDGID EB44241 manual Unpacking and Checking Contents

Unpacking and Checking Contents

1.Remove tool from carton by lifting unit.

2.Place the tool on a secure, stationary work surface and look the tool over carefully.

WARNING: For your own safety, never connect plug to power source outlet, or insert switch key until all assembly steps are complete and until you have read and understood the entire own- ers manual.

WARNING: To reduce the risk of injury, if any parts are missing, do not attempt to assemble the sander, plug in the power cord, or turn the switch on until the missing parts are obtained and installed correctly.

List of Loose Parts

NOTE: Before beginning assembly, check that all parts are included. If you are miss- ing any part, do not assemble the sander. Call 1-866-539-1710 or E-mail us at info@ridgidwoodworking.com if any parts are damaged or missing. Sometimes small parts can get lost in packaging material. Do not throw away any packag- ing until sander is put together. Check packaging for missing parts before con- tacting RIDGID.

Item		Description	Qty.
A	Oscillating Edge Belt/
	Spindle Sander		1
B	Spacer Ring Inserts
	1/2" I.D		1
	1" I.D		1
	1-1/2" I.D		1
	2" I.D		1
C Drums
	3/4" x 4-1/2"		1
	1" x 4-1/2"		1
	1-1/2" x 4-1/2"		1
	2" x 4-1/2"		1
D	Sandpaper Sleeves
	1/2" x 4-1/2"		1
	3/4" x 4-1/2"		1
	1" x 4-1/2"		1
	1-1/2" x 4-1/2"		1
	2" x 4-1/2"		1
E	Sanding Belt (Installed)
	4" x 24"		1
F	Insert		1
G	Operators Manual		1
H	Bag of Loose Parts
Containing the following parts:
Rubber feet			4
Washer, Flat 21/64 x 1-3/4 x 1/8			1
Washer, Flat 21/64 x 7/8 x 3/64			1
Washer, Flat 21/64 x 5/8 x 1/32			1
Switch Key		.........................................	1
Hex “L” Wrench 3/32			1
Hex “L” Wrench 5/32			1

Loose Parts

A	E	Spacer Ring Inserts
		B

1/2" 1" 1-1/2" 2" Drums and Sandpaper Sleeves

C D

F G H

1/2" 3/4" 1" 1-1/2"2"

NOTE: The sander is shipped with the 4" x 24" sanding belt attached.

NOTE: Parts shown are not actual size.

11