ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Random Orbit Sander
Sanding Disc,
Cloth Dust Bag (1)
Dust Bag Support (1)
Vacuum Adaptor
Hex Key
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
OPERATION
WARNING:
Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
APPLICATIONS
You may use this tool for the purposes listed below:
nSanding wood or wood product surfaces.
nSanding steel surfaces.
nRemoving rust from steel surfaces.
WARNING:
Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.
WARNING:
Failure to unplug the tool could result in accidental starting causing possible serious injury.
ADJUSTING THE HANDLE
See Figure 2.
To adjust the handle:
nUnplug the sander.
nLoosen and remove the handle by turning the dial counterclockwise.
nMove the handle to the desired position.
nTighten the handle by turning the dial clockwise.
COUNTERCLOCKWISE
CLOCKWISE
Fig. 2
10