RIDGID R840011 manual Customer Service Information

Page 20

OPERATOR’S MANUAL

1/2 in. 18 VOLT DRILL 2-SPEED

R840011

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.	R840011

Serial No.

983000-476
3-24-06 (REV:01)	20
	20

Image 20

Contents OPERATOR’S Manual Table of Contents IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules ServiceImportant Safety Instructions Safety Rules for ChargerSymbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningFeatures Product SpecificationsPack Charger BIT StorageAssembly Operation LED Function of Charger RED LED Green LEDTo Install Battery Pack To Remove Battery PackSwitch Trigger Depress Latches to Release Battery PackDirection of Rotation Selector Adjustable Torque Clutch Adjusting TorqueInstalling Bits Lock Tighten RightRemoving Bits Using the Auxiliary Handle AssemblyWrong Auxiliary Handle Assembly Drilling Maintenance General MaintenanceBattery Pack Removal Preparation for Recycling BatteriesMallet Chuck Jaws HEX KEY Keyless Screwdriver Chuck RemovalTo Retighten a Loose Chuck Warranty Customer Service Information