FEATURES
KNOW YOUR DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself with all operating features and safety rules.
AUXILIARY HANDLE ASSEMBLY
Your drill is equipped with an auxiliary handle assembly for ease of operation and to prevent loss of control.
BIT STORAGE
Bits provided with the drill can be placed in the storage area, located on the base of the drill.
CHARGER
The charger has a
DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibility of accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to
TORQUE ADJUSTMENT RING
The drill has a
TWO-SPEED GEAR TRAIN
The
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.
ASSEMBLY
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
1/2 in. Drill Charger Battery Pack (2) Auxiliary Handle
WARNING:
If any parts are damaged or missing do not oper- ate this tool until the damaged or missing parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create acces- sories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
9