How to Wire Your Ceiling Fan | Emerson CF3900HTW01, CF3900WPB01

How to Wire Your

Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insu- lation). Securely connect wires with wire connector supplied.

5.Secure the ceiling cover in place by sliding lock- washers over the threaded studs and installing the two knurled knobs (supplied). (Figure 5.) Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.

	CEILING COVER
1-1/4"	LOCKWASHERS (2)
1-1/4"
THREADED
STUD
KNURLED KNOB

Figure 5

!WARNING

GROUND WIRE

BLACK AND BLUE FAN WIRES

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

WIRE

CONNECTORS (3)

GREEN WIRE (GROUND)

FROM FAN

GREEN WIRE (GROUND)

FROM HANGER BALL

Figure 4

WHITE SUPPLY (NEUTRAL)

WHITE FAN

WIRE

BLACK SUPPLY (HOT)

NOTE: CEILING COVER OMITTED FOR CLARITY.

6.Slip the switch pull chain through the hole in the pendant (supplied), then secure the pendant by snapping the coupling (supplied) onto the end of the chain.

Using Your Ceiling Fan

1.	Restore electrical power to the outlet box by turning
	the electricity on at the main fuse box.
2.	Check the operation of the fan by gently pulling on
	the pull chain switch.

NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring.

2. Securely connect the fan motor white wire to the

supply white (neutral) wire using wire connector

supplied (Figure 4). Securely connect the fan motor

black wire and blue wire to the supply black (hot)

wire using wire connector supplied (Figure 4). After

connections have been made, turn leads upward

and carefully push leads into the outlet box, with

3. If airflow is desired in opposite direction, turn your

fan off and wait for the blades to stop turning, then

slide the reversing switch to opposite position, and

turn fan on again. The fan blades will turn in the

opposite direction and reverse the airflow.

Your fan model is equipped with a 4-position pull

chain switch. The operating sequence is as follows:

the white and green leads on one side of the outlet

box and the black and blue leads on the other side

of the outlet box.

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

THREE-SPEED 1st Pull—HIGH 2nd Pull—Medium 3rd Pull—Low 4th Pull—OFF

REVERSIBLE

SWITCH

SPEED CONTROL SWITCH

3. Screw the two 1-1/4” threaded studs (provided) into the tapped holes in the hanger bracket.

4. Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the

ceiling cover (Figure 5).

CF3900PB01, CF3900CK01, CF3900HTW01, CF3900OB01, CF3900TG01 specifications

The Emerson CF3900 series ceiling fans, including models CF3900BQ01, CF3900WPB01, CF3900AW01, CF3900CK01, and CF3900WW01, represent a perfect blend of style and functionality that caters to diverse consumer tastes and home aesthetics. These ceiling fans are designed to enhance indoor air quality and comfort while adding a decorative touch.

One of the main features of the CF3900 series is its powerful yet energy-efficient motor. This WhisperWind motor technology ensures that the fans operate quietly, allowing for a peaceful environment in any room. The motor has been engineered to deliver optimal airflow, making it suitable for both large and small spaces.

The design options available in the CF3900 series cater to contemporary and traditional settings alike. With finishes like black (BQ01), white (WPB01, WW01), and custom aesthetics like antique wood (AW01) and chic custom colors (CK01), there is a fan that can match virtually any interior. The blade span also varies, ensuring that consumers can select a fan that best suits the size of their rooms.

In terms of technology, the CF3900 fans are compatible with a variety of smart controls. This functionality enables users to operate their fans through remote controls or smart devices, enhancing convenience and allowing for tailored cooling experiences. The reverse function is another notable feature, enabling the fan to rotate in both clockwise and counterclockwise directions, allowing for year-round use—cooling in the summer and enhancing heat distribution during winter months.

The easy-install system simplifies the setup process for homeowners, making it a DIY-friendly option. Additionally, the fans come equipped with durable blades made of high-quality materials, ensuring longevity and resistance to warping, thereby maintaining aesthetic appeal over time.

Modern ceiling fans like the Emerson CF3900 series emphasize energy efficiency, with ratings that reflect reduced energy usage, contributing to lower utility bills. The combination of aesthetics, functionality, and technological innovation makes the CF3900 series a versatile choice for any homeowner looking to enhance their living spaces. Ultimately, these fans embody Emerson’s commitment to quality and innovation, making them a smart investment for improved comfort and style.