Assembly Instructions

1.	Remove the fan motor and housing assembly from
	styrofoam packaging and position it so that the top
	of the motor is facing you.
2.	Separate, untwist and unkink the three motor
	leads. Route the motor leads through the hanger
	ball/downrod assembly and seat the downrod in the

5.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod. Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 8.

motor coupling.

3. Align the clevis pin holes in the downrod with the

holes in the motor coupling. Install the clevis pin

and secure with the hairpin clip. The clevis pin

must go through the holes in the motor coupling

and the holes in the downrod. Push the straight leg

HANGER BALL

DOWNROD

SETSCREW

of the hairpin clip through the hole near the end of

the clevis pin until the curved portion of the hairpin

clip snaps around the clevis pin. The hairpin clip

must be properly installed to prevent the clevis pin

from working loose. Pull on the hanger ball to make

sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tight- ened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

HANGER BALL
	DOWNROD
	HAIRPIN
SETSCREW	CLIP
SETSCREW
CLEVIS PIN	MOTOR
	COUPLING

HANGER BALL/

DOWNROD

HAIRPINASSEMBLY

CLIP

CLEVIS	CLEVIS
	PIN
PIN	MOTOR COUPLING

4.Install the setscrew (supplied in loose parts bag) in the motor coupling. While pulling up on the hanger ball, tighten the setscrew using the 5/32" setscrew wrench (supplied).

NOTE: The setscrew must be properly installed as described above, or fan wobble could result.

SETSCREW

DOWNRODWRENCH

6.Screw two 1” threaded studs (provided) into the motor. Leave approximately 7/8” of the stud extend- ing above motor. Slide the motor cover over the downrod and rotate the cover until the threaded studs protrude; install two knurled knobs (supplied) to secure the cover.

NOTE: Make sure the red and brown leads are capped with wire connectors and are completely inside motor cover and not pinched between the motor cover and motor.

		KNURLED
		KNOB
		MOTOR
		COVER
	WIRE
	CONNECTORS
		1" THREADED
	RED LEAD	STUD
	RED LEAD	MOTOR
	BROWN LEAD	MOTOR
	7/8"

7.Position the ceiling cover over the downrod. Be sure the cover is oriented correctly, with the large open- ing at the top.

8.Reinstall the hanger ball on the downrod as follows. Route the motor leads through the hanger ball and slide the hanger ball over the downrod. Install the pin through the holes at the top of the downrod and slide the hanger ball up the downrod, aligning the ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

HANGER BALL

DOWNROD

SETSCREW

CEILING COVER

CF3900PB01, CF3900CK01, CF3900HTW01, CF3900OB01, CF3900TG01 specifications

The Emerson CF3900 series ceiling fans, including models CF3900BQ01, CF3900WPB01, CF3900AW01, CF3900CK01, and CF3900WW01, represent a perfect blend of style and functionality that caters to diverse consumer tastes and home aesthetics. These ceiling fans are designed to enhance indoor air quality and comfort while adding a decorative touch.

One of the main features of the CF3900 series is its powerful yet energy-efficient motor. This WhisperWind motor technology ensures that the fans operate quietly, allowing for a peaceful environment in any room. The motor has been engineered to deliver optimal airflow, making it suitable for both large and small spaces.

The design options available in the CF3900 series cater to contemporary and traditional settings alike. With finishes like black (BQ01), white (WPB01, WW01), and custom aesthetics like antique wood (AW01) and chic custom colors (CK01), there is a fan that can match virtually any interior. The blade span also varies, ensuring that consumers can select a fan that best suits the size of their rooms.

In terms of technology, the CF3900 fans are compatible with a variety of smart controls. This functionality enables users to operate their fans through remote controls or smart devices, enhancing convenience and allowing for tailored cooling experiences. The reverse function is another notable feature, enabling the fan to rotate in both clockwise and counterclockwise directions, allowing for year-round use—cooling in the summer and enhancing heat distribution during winter months.

The easy-install system simplifies the setup process for homeowners, making it a DIY-friendly option. Additionally, the fans come equipped with durable blades made of high-quality materials, ensuring longevity and resistance to warping, thereby maintaining aesthetic appeal over time.

Modern ceiling fans like the Emerson CF3900 series emphasize energy efficiency, with ratings that reflect reduced energy usage, contributing to lower utility bills. The combination of aesthetics, functionality, and technological innovation makes the CF3900 series a versatile choice for any homeowner looking to enhance their living spaces. Ultimately, these fans embody Emerson’s commitment to quality and innovation, making them a smart investment for improved comfort and style.