![](/images/new-backgrounds/1211682/211682141x1.webp)
7.4.3Radio Re-assembly - Detailed
7.4.3.1Dust Cover Re-assembly
1.Insert the tail of the dust cap into the bottom hole of the audio jacks housing opening (Figure
2.Press the dust cap until the tail is fully into the hole.
3.Twist the dust cap
4.Press the cap again to ensure it fully covers the opening for the audio jack.
1 | 2 | 3 | 4 |
Figure 7-9. Dust Cap Re-assembly
7.4.3.2Microphone and Speaker Re-assembly
1.Check that the speaker felt is in position and is not damaged. If damaged replace felt.
2.Insert the microphone
3.Insert the Boot and microphone
Microphone
Boot
Microphone Recess
Microphone Position
Figure 7-10. Microphone Re-assembly
4.Locate the speaker tab and align it with the tab opening in the front housing (Figure
5.Insert the speaker tab into the speaker recess in the housing. Ensure the speaker is seated flush in the housing
December 3, 2003 | HKLN4215A |