ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
Hammer Drill
Auxiliary Handle
Tool Bag
Charger
Battery Pack
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
360°
ROTATION
AUXILIARY
HANDLE TO TIGHTEN
TO LOOSEN
Fig. 2
INSTALLING THE AUXILIARY HANDLE ASSEMBLY
See Figure 2.
An auxiliary handle assembly is packed with the drill for ease of operation and to help prevent loss of control. The handle can be rotated 360°, and it can also be mounted on the opposite side for left hand use.
To install the auxiliary handle assembly:
Loosen the handle assembly by turning the handle counterclockwise.
Rotate the handle assembly to the desired operating position.
Securely tighten by turning the handle assembly clockwise.
Be sure the handle assembly is securely tightened against the clamp. This secures the handle assembly.
NOTE: For convenience and ease of starting threads, the hex nut has been trapped inside the molded slot in the handle assembly.
10