RIDGID R851150 manual LED Function of Charger, LED Battery RED Green Action Indicator Pack

Page 13

OPERATION

LED FUNCTION OF CHARGER

See Figure 5.

	LED	BATTERY	RED	GREEN	ACTION
	INDICATOR	PACK	LED	LED

	Charging	Fast charging	ON	OFF	Charges in 1 hour
		Deeply			Charger pre-charges battery until normal voltage
	Charging		ON	OFF	is reached, then begins fast charge mode. May
		Discharged
					take longer than 1 hour to fully charge.

	Full	Maintenance	OFF	ON	Fast charging is complete
		charging			Charger maintains charge mode

	Evaluate	Hot battery	Flashing	OFF	When battery pack reaches cooled temperature,
		pack			charger begins fast charge mode

	Evaluate	Cold battery	Flashing	OFF	When battery pack reaches warmed temperature,
		pack			charger begins fast charge mode

	Defective	Defective	Flashing	Flashing	Battery pack or charger is defective

• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a second time, try charging a different battery.

•If a different battery charges normally, dispose of the defective pack (see Maintenance section).

•If a different battery also indicates “Defective,” the charger may be defective.

13

Image 13

Contents OPERATOR’S Manual NEW Battery Packs Must be Charged Before First USEIntroduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetyBattery Tool USE and Care Specific Safety RulesService Safety Rules for Charger Important Safety InstructionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesMode Change Ring Auxiliary Handle AssemblyTorque Adjustment Ring Know Your Hammer DrillInstalling the Auxiliary Handle Assembly AssemblyUnpacking Packing ListOperation Charging the Battery PackApplications Charging a HOT Battery Pack Charge Level IndicatorCharging a Cool Battery Pack To ChargeLED Function of Charger LED Battery RED Green Action Indicator PackRemoving Battery Pack To Install Battery PackSwitch Trigger Drill BIT Hammer Mode Drive Torque Adjustment Selecting DRIVE, DRILL, or Hammer SettingRemoving Bits Installing BitsDrilling Using the Auxiliary Handle AssemblyMetal Drilling Wood DrillingMasonry Drilling General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesChuck Removal To Retighten a Loose ChuckDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information